3-Way Professional Audio Crossover

Conocé más detalles

Two-way stereo and three-way mono electronic crossover. TRS or XLR differential balanced inputs and outputs. Stereo or synthesized subwoofer can be selected by adding the left and right channels. Both channels have a ×10 fan switch. Both channels have a 40 Hz high pass filter (floor cut). All outputs have phase reversal switches. Output levels in all frequency bands can be adjusted independently on the Linkwitz-Riley dB/oct filter (professional standard). The stereo/mono status indicator LED lights up, indicating the unit's selected working mode. Technical parameters: Differential balanced inputs and outputs TRS or outputs are phase inversion switches Therefore, the output level in the frequency band can be adjusted independently 24dB/oct Linkwitz-Riley filter (professional standard) Stereo/mono status indicator LED lights up, indicating the operating mode selected by the unit enter: Interface: 1/4 inch TRS Type: Electronically balanced/unbalanced, with RF filter Impedance: balanced > 50k ohms, unbalanced > 25k ohms Maximum input level: > +24dBu balanced or unbalanced Common mode rejection ratio CMRR: >40dB, typical value >50dB, 1kHz output: Interface: 1/4 inch TRS Type: Impedance balanced/unbalanced, with RF filter Impedance: balanced 200 ohms , unbalanced 100 ohms Maximum output level: connected to a load greater than 2k ohms, two +21dBu balanced or unbalanced Working performance: Bandwidth: 20Hz-20kHZ, +0/-0.5dB Frequency response: <3Hz -90kHZ, +0/-3dB SNR: Reference value: +4dBu, 22kHz measurement bandwidth Stereo mode Mono mode Low frequency output: >94dB >94dB SI output: >93dB High frequency output: >92dB > 92dB footprint Dynamic range: >114dB, unweighted, any output Distortion + noise: <0.004%+4dBu, 1KHZ <0.04%+20dBu, 1kHz Channel crosstalk: <-80dB, 20Hz-20kHz