Artículo: AMZ-B07TS3GPQ1

Dsd tech

DSD TECH SH-U09C3 Isolated USB to TTL Adapter Featuring FTDI FT232RL IC

0 5 4 122
122 calificaciones
Disponibilidad
En stock
Peso con empaque
0.20 kg
Devolución
No
Condición
Nuevo
Producto de
Amazon

Sobre este producto
  • Industrial-grade USB isolation module: ADI's iCoupler signal isolation technology is used to fully protect the computer's USB port from external short-circuit, shock and other damage.
  • The main chip is FT232RL from FTDI ,High stability. LED indicator for TX,RX,Power,It is very useful when you are debugging or downloading.
  • Protective case: We have installed a protective case for this isolated USB to TTL Converter, which prevents your hands from directly touching the PCB and IC.
  • Both 3.3V and 5V Logic TTL are supported. You can switch by jumper.
  • Customer Support:Offering permanent technical support and a 1-year product replacement service.All questions will be answered for you within 1 business day
₡ 13,449

IMPORT EASILY

By purchasing this product you can deduct VAT with your RUT number

₡ 13,449

Tasa Cero 18 meses con BAC

$10 OFF en tu primera compra con el cupón: 10PRIMERA

Llega en 5 a 11 días hábiles
Con envío
Tienes garantia de entrega
Este producto viaja de USA a tus manos en
Medios de pago Tarjetas de Débito y Crédito

Compra protegida

Disfruta de una experiencia de compra segura y confiable

Conocé más detalles

This FT232 USB to TTL adapter can isolate the signal and power, it comes with two isolation chips, even if your external circuit is short-circuited or high voltage is applied, it will not damage your USB port, thus protecting your computer, this USB to TTL UART isolation module can handle all kinds of complex and harsh conditions. Important Note: This isolated USB to TTL adapter does not have 2 pins for RTS and CTS. If you need to use these 2 pins, don't buy this adapter. Specification: Model: SH-U09C3 Main chip: FTDI FT232RL Isolation voltage: 1500VDC voltage isolation, with continuous short circuit protection Pin Definitions: RXD, TXD, GND, VCC, P30 (P30 for STC MCUs only) TTL level: 3.3V or 5V USB interface: 2.0 Maximum speed: 3Mbps About Indicator LEDs: PWM LED: Power indicator RXD LED: The data transfer indicator flashes when there is data in the USB port. TXD LED: The data reception indicator flashes when the USB port receives data. List of supported systems 1,Windows XP,7,8,10 2. Ubuntu 11.10, kernel 3.0.0-19 or above 3, Mac OS X 10.3 to 10.8 (32-bit and 64-bit) 4. Mac OS X 10.9 and above (64-bit) 5. Windows CE 4.2-5.2, 6.0/7.0 and Windows CE 2013 You can download the driver directly from FTDI's website Works with software HyperTerminal, TeraTerm, WinDBG, all open source serial software on Linux, etc. Packing List: 1 x Isolated USB to TTL Adapter 1 x User Manual 1 x 4 PIN DuPont cable Guarantee: DSD TECH offers a 1-year warranty and lifetime technical support for this isolated USB to TTL adapter. If you encounter any problems, please contact us and we will solve your problem within 24 hours. Important This product uses FTDI FT232RL chips by default, and due to the shortage of chips, some production batches use FTDI FT232RNL model chips. Please

¡Ofertas del día!
Ver más

Ayuda en línea