Speedokote Adhesion Promoter Clear Sealer, Use on Plastic, Primer, Paint, TRC-500, 1 Gallon

Conocé más detalles

DESCRIPTION: TRC-500 Sealer and Adhesion Promoter is a 50 state VOC compliant, single component product that can be used as an adhesion promoter and flex agent in one. Fast drying and provides excellent adhesion on all flexible and rigid plastic parts. FEATURES:● Single Component ● Quick Drying ● Adhesion Promoter and Flex Agent in one ● No Mixing Required unused product can be returned back to can. ● Excellent for use ground effect, new flexible and rigid bumpers, plastic interior and exterior parts. ● 50 State VOC Compliant. COMPATIBLE COATINGS: TRC-500 is compatible with all solvent based urethane, epoxy, or acrylic lacquers, primer, sealers and basecoats. COMPATIBLE SUBSTRATES: TRC-500 can be used on all automotive plastics, primers and previously painted surfaces. Also excellent for use ground effect, new flexible and rigid bumpers, plastic interior and exterior parts. PACKAGING: Part NumberDescriptionSizeQty. Cs. TRC-500Sealer and Adhesion PromoterQuart12 TRS-500-1Sealer and Adhesion PromoterGallon4 PREPARATION: Clean all areas to be painted with SMR-SCUFF Scuff Paste and rinse thoroughly with water. Thoroughly blow making sure surface is completely dry. APPLICATION: Shake Well and filter, apply one even medium coat using a 1.2mm – 1.3mm spray gun tip ensuring uniform coverage. If 2 coats are required apply first coat in a light mist coat. Allowing 3-5 minutes between coats. Wait 10 - 15 minutes, or when tack free, before applying the next coating. Dry times vary with film build, temperature and humidity. If applying basecoat over TRC-500, spray light coats of base until uniform color is achieved, DO NOT apply heavy coats of base coat. NOTE: If parts are left to sit more than 24 hours surface must me scuffed and another coat of TRC-500 must be applied. CLEANING: Clean spray gun with gun cleaner or lacquer thinner immediately after use.